How To Video Game

Guardians of the Galaxy Encore Edition: Switch 2 Frame Rate Explained

Star-Lord in a studded red jacket walks through the crowded streets of Knowhere in Marvel's Guardians of the Galaxy: Encore Edition

Marvel’s Guardians of the Galaxy: Encore Edition targets 30 fps at 1440p in its Quality setting and 40 fps at 1080p in its Performance setting, both in TV mode, and 30 fps in handheld mode, according to developer Eidos-Montréal. Performance is meant for 120 Hz TVs, and the game also supports the Switch 2’s docked VRR, which lets a compatible TV follow the game’s frame rate instead of a fixed refresh.

The Encore Edition launched on Nintendo Switch 2 today, November 5, 2026, at $39.99 on the Nintendo eShop. Below we lay out every official target, which TV setting suits your screen, the exact Switch 2 menus that make Performance and VRR work, what handheld players get, and the numbers Eidos-Montréal has not published.

The Official Targets

Eidos-Montréal gave the targets in two places: the description of its reveal trailer in September, and a post from the game’s official account on October 30, a week before launch, which listed “the graphic settings we’ll support in TV mode.”

Mode Setting Target frame rate Target resolution
TV mode Quality 30 fps 1440p
TV mode Performance (for 120 Hz TVs) 40 fps 1080p
Handheld mode No choice listed 30 fps Not stated

The same October 30 post added: “The game will also support the Switch 2’s new Docked VRR feature.”

Two things to keep in mind. These are targets, not locked minimums: Eidos-Montréal has not published how often either setting holds its number. And the Quality and Performance choice is listed for TV mode only. In handheld mode, the trailer description says the game “targets 30 fps for a smooth experience on the go,” with no second option named.

The port itself came from the original team. Eidos-Montréal associate producer Inès Bruckner said in the September 11 announcement that the studio built the Switch 2 version in-house, rather than handing it to an outside porting studio, so that it “always felt right” on a TV and in handheld play. CDE Entertainment is the publisher on Nintendo’s listing.

Quality or Performance: Which to Pick

The deciding factor is your TV’s refresh rate, not taste.

On a 60 Hz TV, use Quality. A 60 Hz screen refreshes 60 times a second, and 30 fps divides into that evenly: every frame stays on screen for exactly two refreshes. That even rhythm is why Quality is the safe pick for most TVs. Eidos-Montréal describes Performance as a setting “for 120 Hz TVs,” and 40 does not divide evenly into 60, so frames would be held on screen for uneven lengths of time.

On a 120 Hz TV, Performance is the smoother option. At 120 Hz, each of the 40 frames is held for exactly three refreshes, so motion stays even while updating a third faster than Quality. The trade is image detail: Performance targets 1080p against Quality’s 1440p, so the picture is softer, which you will notice most on a large 4K set.

If your TV supports VRR, both settings benefit. With VRR on, the TV changes its refresh rate to match each frame as it arrives, so a dip below target looks less like a stutter. It does not raise the frame rate; it hides the unevenness when the game cannot hold its target.

Guardians is a third-person shooter where you aim Star-Lord’s blasters and call in squad moves, not a twitch shooter, so 30 fps is playable. If you have the TV for it, though, Performance plus VRR is the combination Eidos-Montréal built for.

How to Set Up Your Switch 2 for Performance Mode

Performance needs the console to send a 120 Hz signal, and the Switch 2 does not do that by default. Nintendo’s display settings page lists the options:

  1. Dock the console with the TV on, then open System Settings from the HOME Menu.
  2. Scroll down the left-hand menu and select Display.
  3. Turn on 120Hz Output. Nintendo says it outputs “at a higher refresh rate when supported by both the TV and software.”
  4. Check TV Resolution. Nintendo notes that 120 Hz output “is only supported at 1080p and 1440p resolutions,” so if the console is set to 2160p (4K), change it to 1440p or 1080p.
  5. If your TV supports it, turn on Auto Low Latency Mode (ALLM) in the same menu, which switches the TV to its game mode automatically.
  6. Launch Guardians of the Galaxy and choose Performance in the game’s graphics settings.

Your TV also has to accept 120 Hz on the HDMI port the dock is plugged into. On many TVs only some ports support it, and some need an “enhanced” HDMI option switched on in the TV’s own menu, so check your TV’s manual.

How to Turn On Docked VRR

Docked VRR is new to the Switch 2. Nintendo added it in system update 23.0.0 on September 10, 2026, which reads: “If supported by both the software and your TV, the refresh rate output will be adjusted based on the software’s performance.” Guardians is one of the games that supports it.

  1. Make sure the console is on the latest system update.
  2. Update the dock: with the console docked, go to System Settings, then System, then Dock Update, and select Begin Update. Nintendo says a dock update is required before VRR can be enabled.
  3. Go to System Settings, then Display, then VRR Settings, and toggle on VRR Output.

VRR only works in TV mode and only on a TV or monitor that supports it. If the toggle will not turn on, update the dock first: Nintendo says the feature cannot be enabled without it.

Handheld and Tabletop Mode

In handheld mode, the target is 30 fps, and Eidos-Montréal has not given a resolution. There is no Performance option listed for handheld, so the 120 Hz and VRR settings above do not apply away from the dock. Tabletop mode also runs undocked on the console’s own screen, and Eidos-Montréal has not listed separate targets for it.

Nintendo’s listing promises “seamless handheld play,” and the Switch 2 version adds two control options that matter more on the go: Eidos-Montréal’s announcement lists mouse support through the Joy-Con 2 for menus and aiming, and gyro controls that let you tilt the controller to steer the Milano and guide Peter Quill while sliding and in zero gravity. Nintendo’s listing tags the game with motion controls.

What Eidos-Montréal Has Not Said

As of launch day, these are not in any official statement:

  • The resolution in handheld and tabletop mode.
  • The internal rendering resolution behind the 1440p and 1080p targets, and which upscaling method gets it there. Nothing official mentions DLSS or frame generation.
  • How the game handles the Performance setting when it is connected to a 60 Hz TV.
  • Any patch notes. Eidos-Montréal has not published notes for a launch update on Switch 2.

We will update this guide if the studio publishes any of them. Everything that is official, from the outfits to the price, is in our guide to what the Switch 2 version adds.

Other Settings Worth Knowing Before You Play

  • HDR: Nintendo’s listing confirms HDR output on compatible TVs. In System Settings, then Display, set HDR Output to “Compatible Software Only” if you want HDR in games that support it without forcing it everywhere.
  • Surround sound: Nintendo lists linear PCM surround sound support.
  • Storage: Nintendo’s store data puts the full game at about 49.7 GB, so clear space before you buy. The boxed version is a Game-Key Card that downloads the same data, as our guide to whether there is a physical copy explains.
  • Single player only: Nintendo lists it as a one-player game, with no split-screen or online mode.

If you can already play Guardians on PS5, our guide to whether the Encore Edition is coming to PS5 compares them. For how other big Switch 2 ports chose their targets, see our Stellar Blade Switch 2 performance guide and our Witcher 3 Remastered on Switch 2 guide. Every Guardians guide sits on our Marvel guides hub.

Frequently Asked Questions

What frame rate does Guardians of the Galaxy run at on Switch 2? Eidos-Montréal targets 30 fps in the Quality setting and 40 fps in the Performance setting in TV mode, and 30 fps in handheld mode. These are targets, not locked minimums.

What resolution is Guardians of the Galaxy on Switch 2? The official targets are 1440p in Quality and 1080p in Performance, both in TV mode. Eidos-Montréal has not given a handheld resolution.

Do you need a 120 Hz TV for Performance mode? Eidos-Montréal lists Performance as a setting “for 120 Hz TVs.” On the console side, turn on 120Hz Output in System Settings, then Display, and keep TV Resolution at 1080p or 1440p, the only resolutions Nintendo supports at 120 Hz.

Does Guardians of the Galaxy support VRR on Switch 2? Yes, in TV mode. The game’s official account confirmed support for the Switch 2’s docked VRR, which needs system update 23.0.0, a dock update and a VRR-capable TV.

Is there a Performance mode in handheld? None is listed. Eidos-Montréal names the Quality and Performance settings for TV mode only, and gives handheld a single 30 fps target.

Does Guardians of the Galaxy on Switch 2 run at 60 fps? No 60 fps target has been announced. The highest official target is 40 fps, in the Performance setting on a 120 Hz TV.

Who made the Switch 2 version? Eidos-Montréal, the studio behind the original game, developed it in-house, and CDE Entertainment publishes it on the Nintendo eShop.