How To Video Game

How to Connect a PS5 Controller to an iPhone

A DualSense controller beside PS5 and PS4 consoles, a DualShock 4, and an iPad and iPhone streaming Ghost of Tsushima in Sony's official PS Remote Play art

To connect a PS5 controller to an iPhone, turn the controller off, then hold the Create button and the PS button together until the light bar flashes, open Settings > Bluetooth on the iPhone, and tap the controller in the list. A DualSense works with iOS 14.5 or later and a DualSense Edge with iOS 16.4 or later, and on an iPhone 15 or newer you can skip Bluetooth entirely and plug the controller in with a USB-C cable.

Our general guide to pairing a PS5 controller covers the console and PC. This one goes deeper on iPhone: the exact steps from Apple and Sony, button remapping in iOS, which DualSense features work on a phone, PS Remote Play, and how to get the controller back to your PS5.

What You Need

Sony lists these minimum versions on its support pages for using its controllers with other devices:

Controller Minimum iOS Pairing buttons
DualSense iOS 14.5 Create and PS
DualSense Edge iOS 16.4 Create and PS
DualShock 4 (PS4) No version listed, but Apple supports it Share and PS

Any iPhone 15, iPhone 16 or iPhone 17 is far past both minimums, since each shipped with a newer version of iOS. Two features need a little more: customizing the buttons in iOS Settings needs iOS 16 or later, and the PS Remote Play app needs iOS 16 or later too (iOS 16.4 for the DualSense Edge), according to its App Store listing.

Special editions are still DualSense controllers, so limited runs such as the GTA 6 DualSense controllers pair the same way.

How to Pair Over Bluetooth

These steps combine Apple’s instructions with Sony’s:

  1. Turn the controller off. If its lights are on, hold the PS button until they go off. Unplug any USB cable from the controller.
  2. Put it in pairing mode. Press and hold the Create button, the small button at the upper left of the touchpad, then press and hold the PS button until the light bar starts flashing.
  3. On your iPhone, open Settings > Bluetooth and make sure Bluetooth is on.
  4. Tap the controller when it appears in the list of nearby devices. A standard DualSense shows up as DualSense Wireless Controller.
  5. Check the lights. Sony says the light bar blinks and then the player indicator lights up once pairing is complete.

If the controller pairs but does not connect, Apple’s advice is to press and release the PS button once.

How to Connect With a USB-C Cable

Apple says the DualSense, DualSense Edge, DualShock 4 and Access controller pair and connect automatically when plugged directly into an Apple device with a USB cable that supports data and charging. Every iPhone 15 and later model has a USB-C port, so a USB-C to USB-C cable that carries data is all you need. A charge-only cable will not do it.

If the wired connection does not work, Apple suggests updating both the iPhone and the controller, or pairing over Bluetooth instead. Sony also notes that a DualSense Edge on USB disconnects and turns off when you pull the cable out.

How to Remap the Buttons in iOS

With the controller connected, open Settings > General > Game Controller, tap the controller’s name, then tap Default Controls to change what each button does. Apple lists three more options on the same screen:

  • Home Button Overrides: add a game here to let it respond to the PS button. Otherwise, the PS button does whatever iOS has assigned to it, such as opening the Games app, the Game Overlay or Spotlight.
  • Profiles: save a custom layout and apply it to any of your paired controllers.
  • Buddy Controller: merge two controllers into one, so a second person can help you through a tough section.

What Works on iPhone, and What Does Not

The controller plays any iPhone game that supports controllers, and any PS5 or PS4 game you stream with Remote Play. Not every DualSense feature makes the trip, though. This is what Sony’s pages say:

Feature On iPhone
Buttons and sticks Work in games that support controllers
Adaptive triggers Available when the game supports them. Sony excludes only Android phones
Haptic feedback Not compatible with mobile devices
Built-in microphone and speaker Not compatible with mobile devices
Headset jack Not compatible with mobile devices

Apple adds that support for specific buttons and features, such as a controller’s audio jack or lights, varies by controller and by the app you use it with. If a button does nothing in one game, try another game before you assume the controller is at fault.

How to Play Your PS5 on iPhone With PS Remote Play

The free PS Remote Play app streams your PS5 or PS4 to your phone, and the DualSense, DualSense Edge and DualShock 4 all work with it. Set it up like this:

  1. On the PS5, go to Settings > System > Remote Play and turn on Enable Remote Play.
  2. To start it while the PS5 sleeps, go to Settings > System > Power Saving > Features Available in Rest Mode and turn on Stay Connected to the Internet and Enable Turning on PS5 from Network.
  3. On the iPhone, pair the controller first, then install PS Remote Play from the App Store.
  4. Open the app, sign in with the same account you use on your PS5, and select PS5. The app finds your console and connects.

Sony recommends upload and download speeds of at least 5 Mbps, and at least 15 Mbps for the best performance. The app can also use mobile data (turn it on in the app’s settings), but Sony warns that Remote Play uses a lot more data than most video streaming. Test it at home, near your console, before relying on it elsewhere. Sony’s PS Remote Play page for mobile devices has the full requirements.

How to Switch the Controller Back to Your PS5

Sony’s basic pairing steps say you have to pair again each time you change devices. The quickest way home is a cable: connect the controller to the PS5 with a USB cable and press the PS button, then unplug it and keep playing wirelessly.

If you swap between the phone and the console a lot, use Sony’s pairing slots instead. Sony’s DualSense support page says one controller can hold up to four pairings, each in its own slot:

Slot Buttons to hold Player indicator
1 PS and triangle One light
2 PS and circle Two lights
3 PS and cross Three lights
4 PS and square Four lights
  • To register a slot, turn the controller off, hold the slot’s action button and the PS button for over 5 seconds until the lights flash twice, then pair it in Settings > Bluetooth on the iPhone as usual.
  • To switch devices, hold that slot’s action button and the PS button for about 3 seconds, and release them when the lights blink.

Sony adds one catch: you can normally switch the connection from the iPhone itself, but not while the controller is connected to a PS5, so use the buttons on the controller then. Pressing the PS button on a controller that is off connects it to the last device it used. The DualSense Edge supports the same four slots. If you also use a DualSense on Valve’s hardware, our Steam Machine controller guide covers that side.

How to Unpair the Controller From Your iPhone

Open Settings > Bluetooth, tap the More Info button next to the controller’s name, and tap Forget This Device. To use it with the iPhone again later, pair it from the start.

If It Will Not Connect

Work through these in order:

  1. Start from off. The controller has to be off, with no cable plugged in, before you hold Create and PS.
  2. Press the PS button once if the iPhone shows it as paired but it does nothing.
  3. Forget the controller in Bluetooth settings and pair it again.
  4. Update everything. Install the latest iOS update, and update the controller’s software. Sony offers its PlayStation Accessories app on PC for that, and Apple points to Sony’s instructions if the iPhone says the controller needs a firmware update.
  5. Cut down on Bluetooth devices. Apple says connecting fewer of them can help with wireless interference.
  6. Reset the controller. Turn off your PS5, unplug the controller, and use a pin to press and hold the reset button inside the small hole next to the Sony logo on the back for at least 5 seconds. Then connect it to the PS5 with the USB cable, press the PS button, and pair it with the iPhone again.

Frequently Asked Questions

Can you connect a PS5 controller to an iPhone? Yes. A DualSense works with iOS 14.5 or later, and a DualSense Edge with iOS 16.4 or later.

How do you connect a PS5 controller to an iPhone 15, 16 or 17? The same Bluetooth steps work on every model. These iPhones also have a USB-C port, so you can plug the controller in with a data-capable USB-C cable instead.

Does haptic feedback work on iPhone? No. Sony says the haptic feedback feature is not compatible with mobile devices.

Do the adaptive triggers work on iPhone? Only in games that support them. Sony lists Android phones, not iPhones, as the devices where they do not work.

Can you plug headphones into the controller on iPhone? No. Sony says the headset jack is not compatible with mobile devices.

Do you have to pair it again to use it on your PS5? With the basic method, yes: connect it to the PS5 with a USB cable and press the PS button. With Sony’s pairing slots, you can switch between devices without pairing again.

Can you use a PS5 controller with PS Remote Play on iPhone? Yes. Pair it with the iPhone first, then open the PS Remote Play app.

More PS5