How To Video Game

GTA 6: How to Hotwire a Car

The steering wheel and dashboard of a classic muscle car, seen from the driver's seat in Grand Theft Auto VI

To hotwire a car in GTA 6, get into the driver’s seat and the game starts a short minigame: two semi-circles appear over the car, marked L and R, and you work the left and right sticks to fill both. The prompt spells it out: “Bring together L and R at the right spots to fill the semi-circles and hotwire the vehicle.” Once both are full, the car is yours to drive.

We hotwired an Imponte ’77 Phoenix this way on our PS5 copy on launch night, in the police impound during the Chapter 1 job Unwanted Attention. It took about three seconds. Below is each step, how to check a car before you touch it, which cars can’t be hotwired, and what happened the moment we drove off in Grand Theft Auto VI. The screenshots in this guide come from our recording.

How to Hotwire a Car, Step by Step

  1. Get to the driver’s door. The Phoenix’s door opened for us without any smashed glass, and Jason climbed straight in. A locked car needs the window broken or the lock picked first (more on that below).
  2. Wait for the prompt. Once Jason is in the seat, the hint appears at the top left, and two semi-circles show up over the car, one labeled L and one labeled R. The car’s name sits in a box at the bottom left with two grey icons under it.
  3. Work the sticks. Move the left stick and the right stick to the right spots so each semi-circle fills. On ours, the L side turned pink as it filled.
  4. Drive off. When both semi-circles are full, the two icons under the car’s name turn green and the car is ready to go.

The hotwire minigame in GTA 6, with the L and R semi-circles over a red Imponte '77 Phoenix, the hint to bring together L and R, and Undetected on the right

While we hotwired, the word “Undetected” sat on the right side of the screen, next to the icon the game uses for a professional Criminal Profile. A later hint in the same mission explains it: “A skilled and controlled approach will contribute toward a professional criminal profile.”

Both hotwire icons turned green under the Imponte '77 Phoenix's name in GTA 6, with the hint still showing at the top left

Check the Car First With WAiNK

Before you pick a car, scan it. The game’s hint reads “Hold Up to open WAiNK on your phone to check a vehicle’s specs and info,” and Up here is the D-pad. Point the phone at a car, press R1 when the screen shows “WAiNK It,” and a card shows the car’s Access, Security and Tracker.

In the impound, most of the cars we scanned read Locked, None and None. One read Locked, Alarmed and None, and a Vapid Dominator ASP read Locked, Alarmed and Standard. Those three lines tell you whether you’ll need to get past a lock, whether an alarm will go off, and whether the car is tracked once you take it. Our guide to the WAiNK app covers everything else it scans, and our guide to removing trackers deals with that third line.

A WAiNK scan in GTA 6 showing a Vapid Dominator ASP with Access Locked, Security Alarmed and Tracker Standard

Cars You Can’t Hotwire

Two kinds of car need more than the minigame. Locked cars come first: you either smash the window, which sets off an alarm if the car has one, or pick the lock with the slim jim Moses gives you in Chapter 2, and then you hotwire it as usual. Our guide to the slim jim covers the lockpicking side.

Keyless cars are the exception. You can’t hotwire them at all, so a parked keyless car stays out of reach until Randy hands you the key cloner in Chapter 3. Our guide to the key cloner explains how that works, and our guide to stealing cars puts every method side by side.

What Happens After You Drive Off

We stayed “Undetected” through the minigame. Then, as we drove off through the impound, a single outlined star appeared at the top right. It filled in, “Crime reported” came up on the right, and a second star joined it with three Heat icons underneath for our clothes, face and car.

We lost the police by heading off-road, then took the Phoenix through a Pay ‘n’ Spray to clear the car’s Heat. Our guides to losing a wanted level and the Heat system cover both, and our Unwanted Attention walkthrough has the full mission this came from.

Frequently Asked Questions

How do you hotwire a car in GTA 6? Get into the driver’s seat, then use the left and right sticks to fill the two semi-circles marked L and R. When both are full, the car starts.

How long does hotwiring take in GTA 6? About three seconds on our first try, from the prompt appearing to both icons turning green.

Can you hotwire every car in GTA 6? No. Keyless cars can’t be hotwired, so you need the key cloner Randy gives you in Chapter 3 to take a parked one.

Do you need a tool to hotwire a car in GTA 6? Not for the hotwire itself: we used none. A locked car needs its window smashed or its lock picked with the slim jim before you can get in.

Does hotwiring a car get you a wanted level in GTA 6? It can. We were Undetected while hotwiring, but the crime was reported as we drove off and we picked up two stars.

Every GTA 6 guide we’ve written is on our GTA 6 hub.

More GTA